Solda

- Solda S20 Antistatic Powder works great in dry conditions. - Most often used as a top coat in cold, windblown natural snow, or artificial snow in dry, cold conditions. - S-20 over a base of Solda HC28 runs very well when the snow is cold. - Sold in 35g container. Recommend for: Temperature: -24°C to -2°C (-11°F to 28°F) Humidity: 10-50%

- Solda S-30 powder is a synthetic hydrocarbon base hardener for very cold, dry conditions. - Can also used as a base wax in cold, older snow. - When snow temperatures are cold S-30 often enhances glide and durability when mixed with the appropriate wax for the temperature. - Apply with an iron, scrape while it is still warm and do not brush. Then apply wax of the day over that and iron it together, then scrape and brush. - Sold in 40g container. Recommended for: Temperature: -34°C to -12°C (-29°F to 10°F) Humidity: 10-50%

- Soft nylon hand brush from Solda. - Soft brush bristles made from durable synthetic nylon fibers. - Will not damage base structures.

- Solda's powder mix of HP05 and S-30. - A useful combination of two waxes that compliment each other and consistently work well together. - Solda HP05 is a fast fluorocarbon wax that repels dirt, is long-lasting, and adapts extremely well to changing conditions, like from cold to warmer snow. - Solda S-30 is a great base hardener for very cold snow and is often used as a base for HP05 when the overnight temperature is very low but is expected to warm up by race time. - A great option for races that involve cold and medium-cold snow and medium to low humidity (which can be among the trickiest conditions to wax for). - Available in two different combinations: 50/50% mix and 70/30% mix (70% HP05/30% S-30), which Solda now packages as HP07. - Sold in 20g powder container. 50/50 mix: -25°C to -10°C (-11°F to +14°F) Humidity: 25-80% Best for very cold snow that's warming up. HP07 (70/30 mix): -20°C to -6°C (-4°F to +21°F) Humidity: 35-90% Ideal for cold snow that's warming up or cold humid snow.

- Fine, natural fiber hard horsehair roto brush from Solda. - This brush works best with colder, harder waxes or performance waxes that have a hardener added to them. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.

- Hard nylon hand brush from Solda. - Hard brush bristles made from durable synthetic nylon fibers. - Ideal for harder, colder waxes than standard nylon brushes.

- Super high performance wax powder from Solda. - Powder form can be easily mixed with additives like hardeners. - Ideal for high humidity (50-100%). - Available in 30g powder container. Yellow: Above -4°C (25°F) Red: -13°C to 0°C (8° to 32°F)

- The Solda soft nylon roto brush works best with low hardness waxes. - Available in 100mm and 120mm sizes.

- High quality cork roller from Solda. - No seams for smooth operation and polishing. - Great for fluorocarbon application. - We use this after ironing powders, after rubbing on fluoro blocks or after spray-on fluoros have dried. - Available in 100mm and 120mm lengths.

- Synthetic nylon bristle roto brush from Solda. - Available in 100mm and 120mm sizes.

- Natural/synthetic hybrid bristle roto brush from Solda. - Use this brush to remove medium to warm waxes after scraping. - It will also polish base surface like a shoeshine brush. - Abrasive yet safe on base structures. - Available in 100mm and 120mm lengths.

- Excellent hardener for dirty snow from Solda. - Designed for use in very low temperatures, low humidity, and abrasive snow. - Applied next to the edges, it also preserves the base. - Apply hot, scrape when skis are still warm, then brush. - Sold in a 30g container. Recommended for: Temperature: -34°C to -12°C (-29°F to 10°F) Humidity: 10-50%

- Solda's popular F40 race wax, now available in liquid form! - Great for when you wish to have the utmost performance without time consuming hot-waxing. - Liquid wax with sponge tip allows for easy application. - Ideal for use in 50-100% humidity. - Easily applied cold without an iron: simply apply to the base with the supplied applicator sponge, let dry for 20-30 minutes, then polish with a soft cloth. - Sold in 90ml bottle with cap and applicator sponge. Yellow: -7°C to +10°C (19°F to 50°F) Red: -14° to +1°C (7°F to 34°F) Green: -24°C to -7°C (-11°F to 19°F)

- High performance racing additive from Solda. - Performs very well in new or slightly transformed snow in high humidity. - Designed for use in conditions between those of Fluor 100 and HP05. - Available in 20g or 30g powder or 75ml spray. Recommend for: Temperature: -11°C to +3°C (12°F to 37°F) Humidity: 50-100%

- High performance racing additive from Solda. - Designed for use when temperatures are very cold with medium to high humidity. - Works well on very abrasive and transformed snow. - Ideal for cold, cloudy, low wind conditions where temperatures remain relatively constant throughout the race. - Available in 20g or 30g powder or 75ml spray. Recommend for: Temperature: -23°C to -7°C (-9°F to 19°F) Humidity: 40-100%

- Solda S-32 Powder works as a base hardener and anti-static all in one. - It is a mixture of Solda S-20 and S-30. - Designed for use on very cold snow. - Sold in 35g container. Recommended for: Temperature: -34°C to -12°C (-29°F to 10°F) Humidity: 10-50%

- Fine, natural fiber roto brush from Solda. - Use this brush as the final polish brush for any waxes. - We use this brush to finish our race day fluorocarbon top coats. - Neutral electro/static charge. - Available in 100mm and 120mm lengths.

- Solda's stiff nylon roto brush works best with colder, harder waxes. - Stiff, synthetic nylon bristles. - Available in 100mm and 120mm sizes.

- Super high performance glide wax from Solda. - Ideal wax for very long races when you wish to keep glide advantage as long as possible. - Also great for when you wish to have the utmost performance, regardless of the length of the race. - Very high content of the same nearly pure fluoro-powder that composes HP05. - When humidity is below 70%, a single application of F40 Special ensures a superb glide, without need of a second layer with HP05. - In conditions of very high humidity, a layer of F40 Special + a layer of HP05 delivers unchallenged skis. - Available in 60g and 180g blocks. Yellow: -4ºC to +5ºC (25ºF to 41ºF) Ideal for transformed snow in warmer temperatures above and just below freezing. A great spring-like conditions wax. Orange: -9ºC to +2ºC (16ºF to 36ºF) Excels in new wet snow and non-transformed snow in 50-100% humidity. Red: -13ºC to 0ºC (9ºF to 32ºF) For old and transformed snow in 50-100% humidity. Violet: -14ºC to -4ºC (7ºF to 25ºF) A great wax for cold and non-transformed snow in 50-100% humidity. Green: -24ºC to -13ºC (-11ºF to 9ºF) An excellent choice for colder temperatures.

- Insulated drink belt from Solda. - Insulated design keeps liquids warm longer than a standard water bottle. - Waist belt secured with sturdy, adjustable clip. - Small zipper pocket holds the car keys or a snack.

- This brush is for the final touches on most wax jobs. - Soft felt will remove the last of the excess wax and leave a beautiful, polished finish behind. - Available in 100mm and 120mm lengths.

- Easy to use universal liquid wax from Solda for recreational skiing or training. - Water-based formulation is fluorine free and biodegradable, making it the best option for skiers who want great glide with the least amount of environmental impact. - Designed for use in all types of snow with a wide temperature range. - Easily applied cold without an iron: simply apply to the base with the supplied applicator sponge, let dry for 20-30 minutes, then polish with a soft cloth. - Works best from -13°C to +5°C (9°F to 41°F) in 20-70% humidity. - Sold in 90ml bottle with cap and applicator sponge.

- Solda roto brush handles let you speed up the waxing process. - Allow for faster waxing of skis than hand brushes. - Made for use with a variable speed hand drill. - Bearing-based spindle gives smooth operation and improved durability. - Designed for use with 120mm brushes. - These can also be used with 100mm brushes by cutting a small, 20mm spacer from a piece of PVC pipe and putting it on the the spindle next to the handle.

- Fine, soft brass bristle roto brush from Solda. - Use for freshening bases with fine grind before waxing. - Also for the first brushing of cold waxes after scraping cold bases that have a fine structure. - Available in 100mm and 120mm lengths.

- Solda Superglide is fluorine-free hydrocarbon wax designed for top level skiing. - Offers an excellent combination of gliding and endurance properties without using harmful fluorocarbon ingredients. - Works best on transformed snow when humidity is above 50%. - Apply with an iron to achieve the best results for glide and durability. - Can also be rubbed on and corked in if you are in a pinch. - Great for training and racing. - Sold in a 60g block. Yellow: -4ºC to +5ºC (25ºF to 41ºF) Recommended Iron Temperature: 115ºC (240ºF) Red: -13ºC to 0ºC (9ºF to 32ºF) Recommended Iron Temperature: 120ºC (250ºF) Green: -24ºC to -13ºC (-11ºF to 9ºF) Recommended Iron Temperature: 125ºC (257ºF)

- Solda's Thermo Wax is a low melting point hydrocarbon wax that saturates new bases very well. - Great wax to use to restore bases after a new grind. - Can also be used as a cleaning wax or a storage and travel wax. - Webskis hot box wax of choice. - Sold in 1000g blocks.

- Exceptional powder wax designed for dirty snow conditions. - Ideal for use in conditions between Fluor 100 and HP05. - For hot applications. - Sold in 30g Container. Recommended for: Temperature: -11°C to +3°C Humidity: 50-100%

- Exceptional powder wax designed for dirty and cold snow conditions. - Ideal for medium to high humidity. - For hot applications. - Sold in 30g Container. Recommended for: Temperature: -18°C to -5°C Humidity: 50-100%

- Exceptional high-fluorinated powder wax designed for long marathon type races. - Ideal for use in cold, transformed, and semi-transformed snow conditions. - Designed for medium to high humidity. - For hot applications. - Sold in 30g Container. Recommended for: Temperature: -18°C to -5°C Humidity: 50-100%

- Exceptional high-fluorinated powder wax designed for use in coastal areas. - Ideal for use in areas near the ocean or sea that experience winds with high salt content. - Designed for medium to high humidity. - For hot applications. - Sold in 30g Container. Recommended for: Temperature: -11°C to +3°C Humidity: 50-100%