Trials Bikes & Gear

- Replacement steel bolt. - M5 x 25mm size. - 4mm allen key head. - Ideal for brake clamp bolts (without brake booster). - Sold singly.

- Replacement steel bolt - M6 x 25mm size - 5mm allen key head - Ideal for hub axle bolts - Sold singly

- Spare tubes for your trials bike. - A must have for any trials rider. - Presta valve is the longer, skinnier valve than the standard schrader.

- Spare tubes for your trials bike. - A must have for any trials rider. - Schrader valve is the same type of valve you would find on your car.

- Replacement set of rotor bolts from Avid/Sram. - Constructed from durable steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.

- Light forged stem from Bonz. - Lower 25° rise allows the bar to be at a more comfortable angle while still maintaining the rear wheel control benefits of having your bar rolled forward. - 3D forged construction provides great strength and is lighter than similar welded stems. - Forged from a single piece of high quality 6061 aluminum. - High quality cromoly bolts in all clamps offer secure and reliable clamping. - One-piece 4-bolt bar clamp plate has had excess material removed from the center in order to save weight while still being more durable than two-piece designs. - Ridges on the inner surfaces of the clamping area help secure the handlebar and prevent it from rotating. - Rounded steerer clamp edges and bolt heads help reduce the painfulness of hitting a knee on the stem. - Compatible with 31.8mm oversized handlebars. - Anodized black finish with silver clamps and Bonz graphics. - Available in 145mm x 25° only.

- Alloy riser handlebar from Bonz. - Manufactured from durable, high quality aluminum. - Mid rise geometry is to suit a variety of riding setups and preferences. - 31.8mm oversized clamp to fit nearly all trials stems. - Width markings on edges for easy adjustment and cutting. - Anodized black finish with Bonz graphics.

- Custom Webcyclery tech t-shirts from Club Ride. - 100% Polyester construction gives a comfortable, stretchy fit. - Wicks away moisture and sweat. - Mesh side panels keep you cool. - Built in UPF 30 sun protection. - Features a small zip pocket on the right rear of the jersey. - Standard t-shirt style fit. - Available in black with grey logo or orange with black logo.

- Danny MacAskill's signature tire from well known mtb brand Continental! - Developed by Continental with direct input from Danny MacAskill and fitted to the top end Inspired Team bikes. - Interconnected tread pattern helps keep rolling resistance low whilst the unique angled block design and spacing give maximum grip when needed. - Constructed from Continental's high performance Black Chili compound that provides a combination of excellent grip and high durability. - Thicker sidewalls to help reduce the chance of punctures. - Folding Kevlar bead helps to minimize weight. - Available in 24" x 2.4" size only. Please Note: This tire fits extremely tightly on Inspired Team V2 rims. Inflating the tire too high when trying to seat the bead can cause damage to the bead and/or casing. Because of this, Inspired recommends not seating the bead when using these tires in combination with the Team V2 rims.

- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.

- Replacement freewheel lockring to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano Hollowtech 2 style bottom bracket tool such as the Park BBT-9. - When installing, the small lip side should be facing the bb bearing. - Also fits Crewkerz rear hubs as a cog lockring. - Anodized red finish.

- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano FC16 crank arm installation tool. - To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten. - Anodized red finish.

- High performance replacement brake pads for hydraulic rim brakes. - Good braking performance in wet and dry conditions. - Red pad material gives great bite and hold in dry conditions when used in conjunction with a light grind. - For maximum performance in wet weather, use a slightly deeper, harsher grind. - 7.5mm of pad material gives great wear life. - Fitted with tough plastic backings to give great value for money. - Sold as a pair (for one brake).

- Replacement thru-axle for Crewkerz hubs. - Compatible with Crewkerz frames and forks only. - High quality aluminum construction. - Fitting for T-40 Torx wrench for easy adjustment and less chance of stripping than a standard allen key fitting. - Available in 9mm front or 12mm rear. - Anodized red finish. - Sold individually.

- Splined cog from Crewkerz. - CNC machined from super tough Cro-Moly steel for maximum durability. - Wide base gives a greater contact area between hub and sprocket, helping prevent 'dig-in' problems associated with narrow based sprockets. - Compatible with Crewkerz and Bonz hubs as well as any other hub that uses the industry standard Shimano HG spline pattern. - Compatible with all 1/8" and 3/32" chains. - Black finish with laser etched product information.

- Bottom bracket cups for Crewkerz AS30 cranksets. - Machined from high quality aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - Pressfit 30 cups fit frames with a 46mm internal diameter pressfit bottom bracket shell such as Crewkerz and Clean. - Available in anodized black. - Sold as a pair of cups (one bottom bracket).

- Lightweight half bashring from Crewkerz as found on their AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with pre-2018 Crewkerz AS30 cranks, may also work with other cranks. - Available in 18t with red anodized finish. Please Note: These are designed for use with pre-2018 Crewkerz AS30 cranksets. The small pocket on the ring that mates with the pin needs to be modified slightly (enlarged) to fit the newer AS30 cranks.

- Lightweight half bashring from Crewkerz as found on their 2018 and newer AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 forged cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with 2018 and newer Crewkerz AS30 cranks, may also work with older AS30 and other cranks. - Available in 18t with red anodized finish.

- Internal tapered headset from Crewkerz as found on their complete bikes. - Sealed bearing design keeps out dirt and grit for smooth running. - Aluminum cups reduce weight without sacrificing durability. - Fits Crewkerz frames using an internal headset with a tapered 1 1/8" - 1.5" fork. - May also fit other frames using a tapered internal headset with 44mm diameter upper cup with 56mm diameter lower cup. - Does not include a crown race (Crewkerz forks have an integrated crown race and do not require a separate race). - Not supplied with starnut or top cap. - Black anodized finish. Please Note: These may be supplied with a slightly different appearance than the photos.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Competition style stem from Crewkerz. - Tested and used by World Champion Jack Carthy. - Unique lower 20° rise geometry is designed for modern bikes with high bottom brackets and allows the bar to be at a more comfortable angle while still maintaining the rear wheel control benefits of having your bar rolled forward. - 3D forged construction for an optimal strength to weight ratio. - 2-piece 4-bolt bar clamp is lightweight and allows easy installation of handlebars. - Custom, wide bar clamp provides extra support and stiffness, while ridges on the inner surface of the clamping area help secure the handlebar and prevent it from rotating. - Unique sloping design provides extra clearance and a clean look without the need to cut the fork steerer at an angle. This is accomplished by an inner ring that the top cap rests against. - Rounded clamp edges help reduce the painfulness of hitting your knee or chest on the stem. - 31.8mm oversized clamp is compatible with nearly all trials bars. - Available in a variety of lengths to suit any rider. - Anodized black/red finish with grey/red Crewkerz graphics and geometry info printed on underside of stem. - Supplied with matching sloped top cap and bolt as well as a 20mm spacer for use on top of the stem, allowing you to experiment with your stem positioning/height before cutting your steerer tube down.

- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized black finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.

- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - 170 and 175 lengths supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring (170 & 175 lengths only). Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty. Also note: Some cranksets now feature black anodized parts instead of the red shown in the photos.

- The smallest bike in the Crewkerz bike line is designed for the youngest aspiring trials riders. - 18" wheels, small frame and size specific parts help young riders learn and master the basics of trials. - Spec'd with quality Crewkerz parts throughout for great value and durability. - Cable disc brakes provide reliable stopping power. - Designed for kids up to 4ft. tall. Geometry - Wheelbase: 740mm - Chainstay: 290mm - BB Height: +30mm - Head Angle: 71.5° - Frame Spacing: 116mm

- Top-end 26" competition frame from French brand Crewkerz, known for their innovative designs and exacting attention to detail. - Ridden by Crewkerz team rider and multiple World Champion Jack Carthy. - Tapered 1 1/8"-1.5" headtube is compatible with tapered forks to provide a stiff, strong front end. - Distinctive holes machined out of the headtube reduce weight. - Compatible with 1 1/8"-1.5" tapered internal headsets such as the Crewkerz tapered headset. - Asymmetrical frame design with a large diameter press fit bottom bracket shell results in superior stiffness, giving the rider maximum power transfer to the pedals. - Compatible with 91mm wide AS30 press fit bottom brackets and Crewkerz AS30 or Clean 3-Piece cranksets. - Integrated sprung chain tensioner (sold separately) is built into the frame and tucked out of the way under the chainstay, making it harder to hit. - 12mm Thru-Axle rear end for ultimate stiffness. This also means the rear wheel is always aligned perfectly and the brake doesn't need to be adjusted when the chain stretches. - Compatible with 135mm x 12mm thru-axle rear hubs. - Frame features integrated clips to keep the brake crossover line securely tucked out of the way. - Dedicated 4-bolt rim brake mounts spaced at 100mm to fit all modern rear rims. - Compatible with standard M5 brake clamp bolts. - 3 cable guides on the underside of the top tube keep brake line routing clean. - Available in a brushed aluminum finish with Crewkerz graphics. - Available in Short, Medium or Long lengths to suit different size riders and riding styles. Geometry: - Wheelbase: 1065mm (S), 1075mm (M), 1085mm (L) - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 72° - Head Tube Length: 125mm - Reach: 657mm (S), 664mm (M), 671mm (L)

- 24" street trials bike from French brand Crewkerz, known for their innovative designs and exacting attention to detail. - Ridden by Crewkerz team rider Leo Nobile. - Incorporates many of the same features found on their well known Jealousy competition bike. - Tapered frame and fork provide excellent front end stiffness and durability. - Integrated sprung chain tensioning system is built into the frame and tucked out of the way under the chainstay, making it harder to hit. - Thru-Axles front (100 x 15) and rear (135 x 12) for ultimate stiffness. This also means the rear wheel is always aligned perfectly and the brake doesn't need to be adjusted when the chain stretches. - Asymmetrical frame design with a large diameter press fit bottom bracket shell results in superior stiffness, giving the rider maximum power transfer to the pedals. - Crewkerz's competition-proven AS30 2-piece crankset with a 30mm aluminum axle is a nod to their competition roots. - The fork features a top cap that allows the front brake to be routed through the steerer. (we no longer provide this service, as it complicates boxing and the hose can kink easily in shipping - so it is best to have your local shop do it once you receive the bike). - Beefy +20 Post Mount disc brake mounts on the frame and fork eliminate the need for adaptors when using 180mm rotors. - Magura MT7 HC3 hydraulic disc brakes provide super powerful, reliable braking. Geometry: - Wheelbase: 990mm - Chainstays: 362mm - BB Height: +25mm - Head Angle: 74° - Reach: 665mm - Frame Spacing: 135mm

- DT's standard brass nipples. - The nipples of choice for most of our trials wheelbuilds here at the shop. - Stronger and more resistant to rounding off than alloy nipples. - Available in black or silver.

- DT's alloy nipples are a lighter weight alternative to standard brass nipples. - Great for a lightweight wheelbuild or one that needs some color. - About 25g per wheel lighter than brass nipples!

- DT Champion spokes are affordable, strong straight gauge spokes. - Great for durable wheel builds. - 2.0mm thickness - Available in black or silver. Please Note: If you are unsure what length spokes you need, please contact us.

- Lightweight butted spokes from DT Swiss. - Lighter than straight gauge spokes without sacrificing strength. - Butted construction with 2.0 width at the ends and 1.8 in the middle. - Cold forged for extra durability. - Available in black or silver. Please Note: If you are unsure what length spokes you need, please contact us.