Filter By:
- Tires (11)
- Rims (20)
- Hubs (14)
- Spokes (2)
- Nipples (2)
- Tubes (2)
- Small Parts (5)
- Complete Wheels (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$90.00
- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight.
- Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley.
- Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!).
- Custom butted center section adds strength around the spoke holes for improved durability.
- 31mm wide profile gives a good balance of low weight and tire performance.
- Sleeved joint helps maintain concentricity and maximizes strength.
- Available in sandblast black anodized finish with Carthy Signature laser etched logos.
- Available in 28h or 32h spoke drilling.
- For use with rim or disc brakes.
$5.00 - $6.00
- Rim strips from Trialtech.
- Heavy duty plastic rim tape is tough yet flexible.
- Strong heat bonded join with a large enough hole for all types of valve.
- Matte finish on one side and gloss on the other.
- Very tough, durable, and also waterproof.
- Available in Black or White.
- Front width 25mm, rear width 40mm.
- 24" width 35mm.
$80.00
- High quality sealed rear disc hub from Trialtech.
- 135mm spacing, to fit the majority of modern trials and street frames.
- International standard 6-Bolt disc fitting.
- Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in.
- Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard).
- Serrated end caps and bolt washers help keep the bolts tight and the hub in place.
- CNC machined aluminium shell.
- 32h drilling.
- Available in gloss black with laser etched Trialtech 'bashring' logo.
$75.00
- Durable yet light single wall rims from Trialtech.
- Single wall profile reduces unneccessary weight.
- Wide rim profile provides excellent stability at low tire pressures and reduces tire roll.
- Square holes save weight over traditional circular ones.
- Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight.
- Suitable for both disc or rim brakes.
- Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used.
- Available in 32h drilling only.
- Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.
$50.00
$70.00
29% Off
- Durable yet light single wall rims from Trialtech.
- Single wall profile reduces unneccessary weight.
- Wide rim profile provides excellent stability at low tire pressures and reduces tire roll.
- Square holes save weight over traditional circular ones.
- Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight.
- Suitable for both disc or rim brakes.
- Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used.
- Available in 32h drilling only.
- Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.
$75.00
- Durable yet light single wall rims from Trialtech.
- Single wall profile reduces unneccessary weight.
- Wide rim profile provides excellent stability at low tire pressures and reduces tire roll.
- Square holes save weight over traditional circular ones.
- Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight.
- Suitable for both disc or rim brakes.
- Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used.
- Available in 32h drilling only.
- Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.
$90.00
- Trialtech's Sport Lite rear non-disc hub is lightweight but tough and has been designed to perform at the highest level.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running no matter what conditions you ride in.
- Custom design, CNC machined 7075 aluminum shell and hollow axle.
- Serrated axle ends and bolt washers help keep the bolts tight and the hub in place.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Oversized 10mm axle bolt on the drive side keeps the hub secure in the dropout.
- Matte black anodized finish with stylish Trialtech 'Sport Lite' laser etched logos.
- Supplied with high tensile, zinc plated cr-moly bolts and custom, low profile aluminum washers.
- 3mm removable washer inserts allow the hub to be used with or without snail cams.
- 32h spoke drilling.
$78.00
- Lightweight 19" rear tire developed by OBR (Owned By Riders).
- Tested and used by many top UCI riders including Abel Mustieles.
- Unique tread pattern is a mix of several other common designs to provide excellent grip in all conditions.
- Widely spaced knobs shed mud well while still being aggressive enough for good traction loose terrain.
- Super sticky lightweight rubber compound for maximum grip.
- Siping on center tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Large volume casing provides excellent bounce.
- Wire bead for a secure fit.
- OBR logos on sidewalls.
- Available in 19 x 2.6" size.
$62.00
- Lightweight 20" front tire developed by OBR (Owned By Riders) to compliment their Gekok 19" rear tire.
- Unique diamond-shaped tread pattern grips well on all surfaces without adding unnecessary rolling resistance.
- Widely spaced knobs shed mud well.
- Super sticky lightweight rubber compound for maximum grip.
- Low block tread design helps save weight.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Wire bead.
- OBR logos on sidewalls.
- Available in 20 x 2.0" size.
$62.00
- Lightweight, competition proven front tire from world famous bike trials brand Monty.
- Developed and tested by multiple time World Champions Abel Mustieles and Dani Comas.
- Low block tread design helps save weight.
- Widely spaced tread pattern increases grip and sheds mud better in natural terrain.
- Cut-outs from the central tread blocks reduce weight further as well as improve grip by allowing the blocks to conform to uneven surfaces.
- Thin sidewalls keep weight to a minimum.
- Slow rebound rubber compound improves grip and gives the tire a predictable feel.
- Folding bead reduces unnecessary weight.
- Available in 20 x 2.0" size.
$49.99
- Classic 19" rear trials tire from Maxxis.
- Designed specifically for trials use with input from World Champion Dani Comas.
- Super Tacky rubber compound provides good grip while also maintaining good durability.
- Traditional block style tread is designed to work in both directions.
- Wire bead.
- Available in 19 x 2.5 size.
Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.
$41.95
- Designed for street riding, the K-Rad works great as a street trials tire.
- As spec'd on many Inspired and other street trials bikes.
- Features an inverted tread design and knurled tread surface that's low profile and fast rolling without sacrificing traction or grip.
- Ribbing between knobs strengthens the casing.
- 24" x 2.3" size is suitable for front or rear use.
$99.00
- Lightweight but durable disc front hub from Jitsie.
- CNC-machined from high grade aluminum for excellent durability.
- Sealed bearings protect against dirt and water and ensure smooth running.
- 100mm spacing to fit nearly all modern trials forks.
- Alloy axle keeps weight to a minimum.
- Standard 6-bolt disc mount.
- Serrated axle bolt washers for a secure fit in the dropout.
- Supplied with steel bolts and lightweight alloy spacers.
- Available in anodized black with laser-etched Jitsie logos.
- 28h spoke drilling only.
$85.00
- Lightweight but durable non-disc front hub from Jitsie.
- CNC-machined from high grade aluminum for excellent durability.
- Sealed bearings protect against dirt and water and ensure smooth running.
- 100mm spacing to fit nearly all modern trials forks.
- Alloy axle keeps weight to a minimum.
- Serrated axle bolt washers for a secure fit in the dropout.
- Supplied with steel bolts and lightweight alloy spacers.
- Available in anodized black with laser-etched Jitsie logos.
- 28h spoke drilling only.
$190.00
- Pre-built front 20" disc wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim.
- 3-Cross lacing for good strength and durability.
- Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.
$195.00
- Pre-built rear 24" disc rear wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim.
- 3-Cross lacing for good strength and durability.
- Spaced for use with 116mm frames using snail cams.
- Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams.
- IS 6-bolt disc hub is compatible with all 6-bolt rotors.
$195.00
- Pre-built front 24" wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim.
- IS 6-Bolt disc mount fits many brake rotors.
- 3-Cross lacing for good strength and durability.
- Standard 100mm hub spacing fits a wide variety of forks.
$190.00 - $195.00
- Pre-built front 26" wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim.
- IS 6-Bolt disc mount on disc wheel.
- 3-Cross lacing for good strength and durability on disc wheels.
- Radial lacing on non-disc wheels.
- Standard 100mm hub spacing fits a wide variety of forks.
$99.00
- Strong and affordable 116mm disc hub from Jitsie.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water.
- CNC machined aluminum hubshell.
- Standard 6-bolt disc mount is compatible with all trials rotors.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Serrated hub spacers and axle bolt washers help keep the wheel secure in the frame.
- Supplied with steel bolts.
- Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). If you wish to use the hub in a 116mm frame without snail cams, you will need two additional 3mm spacers.
- Black anodized finish with Jitsie logos.
- 32h spoke drilling only.
$3.25
- Spare hub axle spacers from Belgian brand Jitsie.
- CNC machined from high quality aluminum.
- Designed to work with Jitsie hubs, may also work with other brands.
- Narrower side of spacer rests against hub bearing.
- Available in 2mm, 3mm, and 5mm widths.
- All sizes have a 10mm inner diameter and 16mm outer diameter.
- Anodized black only.
- Sold individually.
$130.00
- Jitsie's superlight 116mm disc hub from their race range of components.
- Designed with input from multiple time World Champion Dani Comas.
- Manufactured in Belgium.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water.
- Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight.
- Features a hollow aluminum axle, further reducing weight.
- Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Black or Red anodized finish with Jitsie laser etched logos.
- Supplied with steel bolts and Jitsie's superlight low profile aluminum washers.
- Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam).
- 32h spoke drilling only.
$110.00
- Jitsie's superlight HS 116mm hub from their race range of components.
- Designed with input from multiple time World Champion Dani Comas.
- Manufactured in Belgium.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water.
- Uses a custom designed, CNC machined 7075 aluminum shell that tapers from one end to the other to minimize weight.
- Features a hollow aluminum axle, further reducing weight.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Black or Red anodized finish with Jitsie laser etched logos.
- Supplied with steel bolts and Jitsie's superlight low profile aluminum washers.
- Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam).
- 32h spoke drilling only
$115.00
- Ultralight non-disc front hub from Jitsie!
- Developed and tested with 10-time World Champion Dani Comas.
- CNC-machined from high quality 7075 aluminum.
- Uses a custom designed, CNC machined shell that tapers from one end to the other to minimize weight.
- Sealed bearings protect against dirt and water and ensure smooth running.
- 100mm spacing to fit all modern forks.
- Hollow alloy axle keeps weight to a minimum.
- Supplied with steel bolts and lightweight alloy spacers.
- Designed and manufactured in Belgium as part of the Jitsie Race range.
- Available in anodized black or red with laser-etched Jitsie logos.
- 28h spoke drilling only
$60.00
- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo.
- Good mix of durability and performance and low weight.
- Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance.
- Tire is designed to work in both directions.
- Super sticky lightweight rubber compound ensures maximum grip.
- Low block tread design helps save weight.
- Generous spacing between center and outer knobs helps shed mud.
- Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces.
- Folding bead.
- Jitsie logos and product info on tire.
- Available in 20 x 2.0 size.
$7.00 - $9.00
- Superlight rim tape from Jitsie.
- Extremely light nylon material is still strong enough to resist tearing and bubbling.
- Significantly lighter than competitor's rim tapes.
- Strong heat bonded join with hole for all valve types.
- Silver/grey with printed Jitsie logos on one side and plain blue finish on the other.
- 30mm front width, 42mm rear width.
$60.00
- Super lightweight 19" rear rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$60.00
- Super lightweight 20" front rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 33mm width provides good stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 28h and 32h spoke drilling.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$65.00
- Super lightweight 24" rear rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$55.00
- Super lightweight 26" front rim from Jitsie.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 33mm width provides good stability and helps prevent tire roll.
- Custom large parallelogram holes keep the weight to a minimum.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Large sidewall area for maximum brake pad contact.
- Available in 28 hole spoke drilling only.
- Anodized black finish with Jitsie stickers around valve holes.
Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.
$115.00
- Top quality sealed bearing rear disc hub, as found on Inspired Pro spec bikes.
- CNC-machined hub shell features more material in high stress areas to improve durability.
- Machined disc side flange reduces weight without compromising strength.
- Threaded section uses a conventional 1.37" x 24tpi, suitable for use with 16t (and larger) screw-on freewheels.
- ISO disc mount is compatible with all 6-bolt disc rotors.
- Fully sealed cartridge bearings provide silky smooth performance in all conditions.
- Available with either 10mm bolt-in axle or 12mm through axle options, both with 135mm spacing.
- 10mm bolt-in version uses a hollow aluminium axle, with M6 steel axle bolts. Compatible with all Flow and Fourplay/Hex (2019 and earlier) frames.
- 12mm version is compatible with Fourplay (2020 onwards) and Hex (2020 onwards) frames, along with all Skye frames.
- Available in anodized black with laser etched Inspired logos.
- 32h drilling only.
Page 1 of 2
Next page