Your Search: "echo"

- Replacement steel bolt - M6 x 25mm size - 5mm allen key head - Ideal for hub axle bolts - Sold singly

- Replacement spring for Crewkerz and Clean chain tensioners. - Strong tension to keep the chain tight and the tensioner from bouncing. - Ideal if your spring has broken or become worn out. - Sold singly.

- Replacement freewheel lockring to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano Hollowtech 2 style bottom bracket tool such as the Park BBT-9. - When installing, the small lip side should be facing the bb bearing. - Also fits Crewkerz rear hubs as a cog lockring. - Anodized red finish.

- Replacement crank pre-load bolt to fit Crewkerz AS30 cranks. - High quality aluminum construction. - Fitted for a Shimano FC16 crank arm installation tool. - To be snugged lightly in place before tightening the M6 crank arm bolts. Do not over tighten. - Anodized red finish.

- Splined cog from Crewkerz. - CNC machined from super tough Cro-Moly steel for maximum durability. - Wide base gives a greater contact area between hub and sprocket, helping prevent 'dig-in' problems associated with narrow based sprockets. - Compatible with Crewkerz and Bonz hubs as well as any other hub that uses the industry standard Shimano HG spline pattern. - Compatible with all 1/8" and 3/32" chains. - Black finish with laser etched product information.

- Bottom bracket cups for Crewkerz AS30 cranksets. - Machined from high quality aluminum. - Sealed bearings run smoothly and help keep out dirt and grit. - Pressfit 30 cups fit frames with a 46mm internal diameter pressfit bottom bracket shell such as Crewkerz and Clean. - Available in anodized black. - Sold as a pair of cups (one bottom bracket).

- Lightweight half bashring from Crewkerz as found on their AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with pre-2018 Crewkerz AS30 cranks, may also work with other cranks. - Available in 18t with red anodized finish. Please Note: These are designed for use with pre-2018 Crewkerz AS30 cranksets. The small pocket on the ring that mates with the pin needs to be modified slightly (enlarged) to fit the newer AS30 cranks.

- Lightweight half bashring from Crewkerz as found on their 2018 and newer AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 forged cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with 2018 and newer Crewkerz AS30 cranks, may also work with older AS30 and other cranks. - Available in 18t with red anodized finish.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized black finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.

- Custom-designed high quality crank/bottom bracket system from Crewkerz. - Drive side crank arm and BB axle are constructed as a single piece, which significantly increases stiffness and reduces weight. - Newly redesigned crank arms are now forged instead of CNC'd to reduce weight and improve strength. - Splined section is compatible with standard Shimano HG splined freewheels such as Crewkerz, Clean, and Bonz. - Freewheel is held in place with a lockring, which requires a standard Hollowtech 2 style tool such as the Park Tool BBT-9 bottom bracket tool. - Machined pockets in back of cranks keeps weight down. - Cranks are pre-loaded by the bearing cap bolt (fitted for a standard Shimano crank arm installation tool) and then held in place with M6 pinch bolts in the non-drive side crank. - Sealed bearings run smooth and keep out dirt and grit. - Press fit bottom bracket and oversized axle increase stiffness over traditional ISIS bottom brackets. - Pressfit BB cups are compatible with Crewkerz and Clean frames only. - 170 and 175 lengths supplied with an 18t half bashring that can be set up for left or right foot forward riders. - The drive side crank features a small nub that mates with a pocket on the bashring to keep the bashring aligned perfectly at all times. - Available in anodized black finish. - Entire kit includes: drive side crankarm with attached axle, non-drive crankarm, bottom bracket, preload bolt, freewheel lockring, and bashring (170 & 175 lengths only). Please note: The threaded end cap is used only to pre-load the bearings and should only be snugged in place. Damage caused by over-tightening this is not covered by warranty. Also note: Some cranksets now feature black anodized parts instead of the red shown in the photos.

- Top-end 26" competition frame from French brand Crewkerz, known for their innovative designs and exacting attention to detail. - Ridden by Crewkerz team rider and multiple World Champion Jack Carthy. - Tapered 1 1/8"-1.5" headtube is compatible with tapered forks to provide a stiff, strong front end. - Distinctive holes machined out of the headtube reduce weight. - Compatible with 1 1/8"-1.5" tapered internal headsets such as the Crewkerz tapered headset. - Asymmetrical frame design with a large diameter press fit bottom bracket shell results in superior stiffness, giving the rider maximum power transfer to the pedals. - Compatible with 91mm wide AS30 press fit bottom brackets and Crewkerz AS30 or Clean 3-Piece cranksets. - Integrated sprung chain tensioner (sold separately) is built into the frame and tucked out of the way under the chainstay, making it harder to hit. - 12mm Thru-Axle rear end for ultimate stiffness. This also means the rear wheel is always aligned perfectly and the brake doesn't need to be adjusted when the chain stretches. - Compatible with 135mm x 12mm thru-axle rear hubs. - Frame features integrated clips to keep the brake crossover line securely tucked out of the way. - Dedicated 4-bolt rim brake mounts spaced at 100mm to fit all modern rear rims. - Compatible with standard M5 brake clamp bolts. - 3 cable guides on the underside of the top tube keep brake line routing clean. - Available in a brushed aluminum finish with Crewkerz graphics. - Available in Short, Medium or Long lengths to suit different size riders and riding styles. Geometry: - Wheelbase: 1065mm (S), 1075mm (M), 1085mm (L) - Chainstay Length: 380mm - Bottom Bracket Rise: 65mm - Head Tube Angle: 72° - Head Tube Length: 125mm - Reach: 657mm (S), 664mm (M), 671mm (L)

We’ve upgraded our venerable EA90 SL wheels, dropping weight and increasing strength. Now, for the first time, Easton is making a tubeless ready wheelset. This allows for durable Sapim straight-pull spokes with standard nipples, enhancing durability and reducing the need for proprietary parts. A completely redesigned rim features a category-leading 19.5mm internal rim in a deeper and stiffer 27mm blunt shaped rim that borrows from our aerodynamic Fantom shape. Finally, these battle-tested wheels are centered on our award-winning Echo hubs. This wheelset is completely hand-built and acoustically tuned using Easton’s painstaking wheel building methods.

- Replacement pedal cage bolts from Echo. - M5 thread with countersunk head. - Constructed from steel for maximum durability. - Bolt head fitted for 3mm allen key. - Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All. - Sold individually.

- Replacement stem bolts for Echo stems. - M6 x 20mm size. - Fitted for 5mm allen key. - May also fit other stems. - Available in steel with black or silver finish or titanium.

- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.

- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.

Derailleur hangers snap pretty regularly when you get into trials. You might hit it on a ledge or when you jump from obstacle to obstacle. It's always advised to have a spare hanger on hand, so you can get back on your bike in 5 minutes. - Break a derailleur hanger on your Echo frame? These are what you need. - Compatible with all vertical dropout 2005-2010 Echo, Zoo!, Adamant, Czar, and GU frames. - Supplied with mounting bolt.

- Lightweight foam grips from Echo. - Tough, durable foam compound feels a bit more like a rubber grip than other foam grips. - Foam construction is comfortable on the hands with or without gloves. - Subtle matte black Echo logos on each grip. - Sold as a pair. - Bar end plugs NOT included.

- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!

- Lightweight aluminum crank bolts as found on Echo complete bikes. - Manufactured from high quality 7075 T6 aluminum. - Supplied with steel spacers. - Fitted for an 8mm allen key. - M15 thread fits most modern ISIS bottom brackets. - Anodized finish with laser-etched Echo logos. Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones. Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.

- Splined cogs to fit pre-2016 Echo splined hubs. - Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Offset design allows fine-tuning of the chainline by flipping over the cog. - Compatible with all 1/8" and 3/32" chains. Please Note: These may come in a black or silver finish.

- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.

- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.

- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.

- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.

- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).

- The Echo Integrated Headset, as found on Echo bikes. - Superlight integrated headset: the bearings press directly into the frame, keeping weight to an absolute minimum. - Easy to install and low maintenance. - Compatible with all Echo, GU, and Czar frames 2015 and newer. - Includes bearings, dust cap wedge, 2 6mm headset spacers, sloping top cap, and titanium top cap bolt. - Not supplied with crown race. - Available to fit standard 1 1/8" frames and 1 1/8"-1.5" tapered frames.

- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.

- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.