Your Search: "echo"

- Replacement derailleur hangers for Zhi frames. - Supplied without mounting bolt.

- Replacement derailleur hangers for Woodman frames. - Supplied with mounting bolt.

- Replacement steel crank bolts from TruVativ. - Fitted for an 8mm allen key. - Includes steel washers. - Available in M12 and M15 sizes. - Sold as a pair.

- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.

- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings. - Standard M6 x 1.0 thread. - For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.

- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.

- Quality bleed hose for hydraulic rim brakes. - M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes. - Can be used as an inlet or outlet hose. - Supplied with Trialtech barbed connector fitted to a 23cm long hose. - Ideal for use with Trialtech bleed syringes. - Sold individually.

- Replacement threaded top cap for Trialtech forks. - Fits Trialtech Sport 20" and 26" forks. - CNC machined from 6061 Aluminum. - Available in anodized black only.

- 10mm chain tugs from Trialtech. - Fits most 20" mod bikes and some 26" bikes. - CNC machined aluminum construction, with M6 threaded bar to keep weight down while maintaining maximum functionality. - Guides on the main body prevent the tug from rotating when tightening the axle bolts. - Sold as a pair.

- Replacement bearing to fit Spanish bottom brackets only. - Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others. - High quality construction with double seals. - For use on the drive or non-drive side. - Sold singly. - OD:37mm, ID:22mm, Width:9mm

- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.

- High quality, CNC machined cromoly snail cam from Trialtech. - Gloss nickel, hard coated finish for extra durability. - A series of incrementally smaller drilled holes are designed to reduce weight without compromising strength. - Notched design to hold your wheel in position and ensure that it doesn't move, designed to be a 'fit-and-forget' product. - High resolution tooth pattern provides fine chain adjustment. - Will fit most bikes with a 10mm axle designed to work with snail cam tensioners. - Sold individually to allow you to tailor your setup to your specific needs.

- Trials specific disc brake pads to fit a variety of brakes from Trialtech. - High performance, sintered disc brake pads tested and proven by Trialtech team riders. - Trials specific compound offers excellent performance in both wet and dry conditions. - Available to fit Hope Mono Trial / Tech Trial / Trial Zone / V2 and Echo TR hydraulic disc brakes, Avid BB5 brakes, Avid BB7/Avid Juicy brakes, Avid Elixir/SRAM DB5, Magura MT2/MT4/MT6/MT8, Magura MT5/MT7 or Shimano Saint/Zee brakes. - Supplied as a pair fully packaged with Trialtech stickers enclosed. - Pad retention pin and clip not included.

- Lightweight and extremely minimal single speed spacer kit from Trialtech. - Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm. - Great for single speed conversions or fine tuning your chainline. - CNC machined from high grade aluminum alloy, then anodized to prevent corrosion. - Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers. - Cassette lockring sold separately.

- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.

- Trialtech Sport Threaded cogs are made from durable steel and are available in a range of sizes. - CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves wear life. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide 10mm base means more threads and a stronger connection between the sprocket and hub/crank. - Tapered design gives maximum strength, while CNC machined slots on larger models help keep the weight down. - Each sprocket is finished with a stylish laser-etched Trialtech logo and size indication. - Compatible with all 1/8" and 3/32" chains.

- Light sprung chain tensioner from Trialtech. - Single speed specific chain tensioner. - Constructed from high grade aluminum alloy, spring steel and chromed steel. - Multi coil spring to prevent loss of tension over time, a common problem with other tensioners. - Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures compatibility with most setups. - Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products. - The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms. - The model with hanger mount fits all frames with a standard derailleur hanger. - Gloss black anodized finish.

- Trialtech's Race Platform Pedals are quality, durable trials pedals that won't break the bank. - Features a one-piece aluminum body - Steel axles are strong and durable. - Sealed bearings are smooth-running and keep out water and dirt. - Features more replaceable pins than similar platform pedals for added grip. - Parallelogram shape that means you'll always get your feet onto the grippiest parts of the pedals. - Large contact area helps keep feet on the pedals at all times. Please Note: These pedals come with reflectors attached (not shown in picture).

- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).

- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- A bashring for threaded cranks on street trials bikes from Trialtech. - CNC machined, high quality 7075-T6 aluminum alloy bashring. - Specifically designed to work on modern street trials bikes. - 22T size, to fit threaded cranks. - 5mm plain cross section gives excellent strength whilst the unique CNC machined pockets remove weight in key areas. - Available in anodized black with Trialtech laser etched logo.

- ISIS cranks forged from high quality 6061 aluminum alloy. - Standard 1.37" x 24 tpi thread to accept a front freewheel or screw-on fixed sprocket. - Wide threaded section allows a bashguard to be used if desired. - Super stiff and strong yet still light enough for competition use. - Tough anodized matt finish, with laser etched Trialtech logos. - 165mm and 175mm lengths available. - Black finish only. Please Note: Always ensure freewheel/screw on sprocket threads are greased before installation.

- Custom designed sprung chain tensioner as fitted to Inspired Team bikes. - Developed and proven by Inspired Team riders. - Constructed from high grade 7075 and 6061 aluminum alloy. - High tension coil spring provides excellent chain tension. - Single sided cage saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise and low drag. - Slim, integrated design helps reduce the chance of damage during riding. - Extended cage improves ergonomics and further aids chain removal. - Fits directly onto Skye V3/V3.5, Fourplay/Hex (2014-onwards) and Link (2023-onwards) frames. - Satin black anodized finish. - 16t (Fourplay, Skye, Link) or 18t (Hex) compatible versions available. - Includes frame fixture bolts.

- Superlight titanium pedal axles from Trialtech. - Lightweight replacement axles for Trialtech Sport Lite caged pedals. - Precision CNC machined from 6AI-4V titanium. - Includes dust seals and axle nuts. - Sold as a pair. - Laser etched Trialtech logos. - Also fit Hashtagg, Jitsie, Try-All, Clean and other caged pedals.

- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.

- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- Durable yet light single wall rims from Trialtech. - Single wall profile reduces unneccessary weight. - Wide rim profile provides excellent stability at low tire pressures and reduces tire roll. - Square holes save weight over traditional circular ones. - Valve hole is drilled at the rim join to allow an additional hole to be machined opposite thereby further saving weight. - Suitable for both disc or rim brakes. - Rim brake users benefit from improved braking performance when ground due to the high grade aluminum used. - Available in 32h drilling only. - Classy gloss black or silver anodized finish with stylish Trialtech logos at the rim join/valve hole.

- High quality sealed rear disc hub from Trialtech. - 135mm spacing, to fit the majority of modern trials and street frames. - International standard 6-Bolt disc fitting. - Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in. - Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard). - Serrated end caps and bolt washers help keep the bolts tight and the hub in place. - CNC machined aluminium shell. - 32h drilling. - Available in gloss black with laser etched Trialtech 'bashring' logo.