Your Search: "wax"

- Start Base kick waxes improve the durability of your kick wax. - Easy to use and can be ironed or corked into the base. - Base Wax is formulated for normal snow conditions. - Base Wax Extra is extremely hard and for coarse grained and abrasive conditions. - 45g stick.

- The Tar is Start's pine tar kick wax line. - Works best in new and fine grain snow. - The tar is water repellent and helps to minimize icing. - Suitable for recreational use in all snow conditions. - 45g stick. Yellow Temperature: 0°C to +2°C (32°F to 36°F) Humidity: 55-75% Purple Temperature: -0.5°C to +0.5°C (31°F to 33°F) Humidity: 55-75% Red Temperature: -3°C to 0°C (27°F to 32°F) Humidity: 55-75% Blue Temperature: -7°C to -2°C (19°F to 28°F) Humidity: 55-75% Green Temperature: -12°C to -7°C (10°F to 19°F) Humidity: 55-75% Black Temperature: -30°C to -10°C (-22°F to 14°F) Humidity: 55-75%

- Start Grip Tape gives excellent grip for all conditions, eliminating the need to re-wax daily when conditions change. - There is no need for extra waxing tools or special waxing rooms when adjusting Grip Tape. - Includes everything that is needed for applying the tape. - For most skiers it lasts the whole season. - Contains 5m of tape, enough for 2-3 pair of skis. - Recommended temperature: -20°C to 5°C (-4° to 41°F)

- Start Klisters provide grip in a wide variety of conditions. - 55g tube. Base Klister Used as a base for other klisters to keep grip consistent and provide durability. Universal Wide Klister -5°C to +10°C (23°F to 50°F) For variable snow conditions or for blending with other klisters and soft kickwaxes. Universal Plus Klister 1°C to 10°C (34° to 50°F) For warm wet snow and blending with other klisters. Red Klister For wet conditions. Special Klister -2°C to +2°C (28° to 36°F) For conditions near freezing. Purple Klister -5°C to 0°C (23° to 32°F) For conditions near freezing. Blue Klister -15°C to -4°C (5° to 25°F) For cold icy tracks.

- Start SG glide waxes are non-fluorinated and efficient basic gliders. - Also can be used for racing as base gliders, when humidity is < 55%. - The Start SG10 Green is the "Start Green" that made Start famous. Start Green should be in every skiers wax box for those super cold days. - 90g block. Purple -2°C to -7°C (28°F to 19°F) Iron Temp: 130°C (266°F) Blue -7°C to -12°C (19°F to 10°F) Iron Temp: 140°C (284°F) Green -10°C to -30°C (14°F to -22°F) Iron Temp: 150°C (302°F)

- Start liquid Anti Ice Glider prevents ice build up on waxless skis. - Handy plastic bottle equipped with sponge to ensure easy and even application to the ski base. - After applying let dry five minutes and the ski is ready for use. - Improves gliding on waxless skis without reducing grip abilities. - One treatment with Anti Ice is enough for approximately ten kilometers of skiing. - 60ml.

- Oslo Racing kick waxes are used by many racers on the World Cup circuit. - Designed for snow conditions commonly found in Norway. - Ideal for coarse grained and aggressive snow. - 45g stick. Purple -3°C to +2°C (27°F to 36°F) Blue -8°C to -2°C (18°F to 28°F) Green -15°C to -7°C (5°F to 19°F)

- Start's RF (Racing Fluor) is their fluorinated kick wax line. - Can be used as kick wax alone, or as a finishing wax applied on top of kick wax. - Ideal for when humidity is 55-100%. - 45g stick. Yellow Temperature: +1°C to +3°C (34°F to 37°F) Purple Temperature: -2°C to +2°C (28°F to 36°F) Red Temperature: -5°C to -1°C (23°F to 30°F) Blue Temperature: -10°C to -4°C (14°F to 25°F)

- What the Italians use to get the sticky klister wax residue off of their hands. - This stuff is amazing, a little goes a long way and it really works. - Comes in a 75ml tube.

- Solda's famous Performance line of high quality low-fluor wax. - Ideal for training and as a base for Solda F-15 and F-31 waxes. - This is the wax we use for 90% of our training here in Bend, Oregon. - Available in 75g or 180g blocks. Yellow -7ºC to +10ºC (19ºF to 50ºF) Red -14ºC to +1ºC (7ºF to 33ºF) Green -24ºC to -14ºC (-11ºF to +7ºF)

- Solda Powerjet is a convenient solid wax that's great for rubbing onto your skis just before the start. - Quick and easy to use and you don't have to worry about spills. - Rub Powerjet onto your ski, cork in, then brush. - For longer-lasting performance, a waxing iron can also be used to apply the wax. - Available in 5g and 22g. - 5g size is good for waxing about 5-8 pairs of skis. - 22g size is good for about 30-50 pair of skis. - Also available in a convenient 5g 5-pack to cover all waxing conditions. PowerJet 1 Temperature: -10°C to +5°C (14°F to 41°F) Humidity: 60-100% A solid version of Solda Fluor 100, it is nearly 100% fluorocarbon. Very fast in warmer conditions in both old and new snow with high humidity. PowerJet 2 Temperature: -16°C to -2°C (3°F to 28°F) Humidity: 60-100% The colder companion to PowerJet 1. This solid fluoro shares many of the same performance characteristics of HP05. If the race morning temperature is very cold, but you expect it to warm up, we recommend corking in a layer of PowerJet 2 over a warmer wax to get you through those first few cold kilometers. PowerJet 3 Temperature: -24°C to -3°C (-11°F to 27°F) Humidity: 10-60% Non-fluorocarbon synthetic compound which is faster than fluoros in cold, dry snow. A perfect last-minute solution when you get to a race site and realize that you have waxed too warm. PowerJet 4 Temperature: -17°C to 0°C (1°F to 32°F) Humidity: 30-100% Has a wide range of use, making it an ideal option in almost all snow and humidity conditions. Use as top layer or as an under layer for fluorocarbon. PowerJet 5 Temperature: -2°C to +10°C (28°F to 50°F) Humidity: 60-100% Solid Fluor for very warm, wet, spring snow conditions.

- Classic plexi scraper from Solda. - 4mm thick plexi-glass is durable and excellent for removing wax from bases.

- Ski straps from Solda for alpine and backcountry skis. - Lightweight and easy to use. - Foam divider keeps ski bases apart, preventing damage from rubbing. - Ideal for skis with a tip width of 75-120mm. - Black/red with Solda logos. - Sold in pairs.

- Easy to use paste wax. - Apply with foam applicator, let dry, buff with a clean cloth and ski. - No ironing or scraping required. - Suitable for all kinds of snow and temperatures at medium humidity. - Includes applicator sponge. - 75ml tube.

- Solda's tried and true F15 wax, now available in liquid form! - Liquid wax with sponge tip allows for easy application. - Ideal for use in 40-80% humidity. - Great for making wax corrections mid-ski: if conditions have changed this wax can be easily and quickly applied during your ski. - Can also be used in the kick zones of waxless skis to prevent icing of fish scales. - 90ml Yellow: -3°C to +1°C (27°F to 34°F) Red: -10° to -3°C (14°F to 27°F) Green: -20°C to -10°C (-4°F to 14°F)

- An easy to apply fluorine paste that's excellent on humid and wet snow. - Can be used as a start accelerator or a waxing corrective for the second run, or on that day when you just don't have time to apply hot wax. - Supplied with a foam applicator. - Apply the paste to the base in a thin coat and let dry for 5 minutes. Follow this with polishing with a dry cloth or a cork. - Sold in 15g container.

- Solda HC1 is an economical paraffin-based wax that does not contain fluorine. - Great for training, prepping ski bases and for travel waxing. - Sold in a 60g block. Orange: -9ºC to +2ºC, 16ºF to 36ºF Best in older, transformed snow. Violet: -14ºC to -4ºC, 7ºF to 25ºF A great training wax because it is so versatile. A wide temperature range, this wax works very well on both new and old snow in dry to medium humidity levels. Green: -24ºC to -7ºC, -11ºF to 19ºF A good choice on those days when the snow is "squeaky" cold. A hard wax, making it very durable.

- Flexible steel scraper from Solda. - Ideal for base peeling or removal of base repair material. - It is important to keep it sharp and to use with care. Improper use of a steel scraper can damage ski bases. - Handy hanging hole.

- High quality wide range training and ski prep wax from Solda. - Sold in 250g and 500g blocks. Red Best for +1ºC to -14ºC Green Best for -6ºC to -24ºC

- Solda's F15 wax is their popular line of medium fluorinated glide wax. - Excellent balance of quality and price that makes it the go-to wax for many athletes and ski enthusiasts alike. - A great race wax choice on days of low to medium humidity and for training on those days you really want to feel fast. - Can be used alone or as a base for racing additives. - F15 line contains a lower percentage of Fluorine than F31, making it more economical. - Same temperature ranges as the F31 line. - 60g box comes with a free 12g sample of Solda F-31 wax. Yellow: -4ºC to +5ºC (25ºF to 41ºF) Ideal for transformed snow in warmer temperatures above and just below freezing. A great spring-like conditions wax. Pink: -9ºC to +2ºC (16ºF to 36ºF) We love this wax in new snow. Great for training on those new snow days that we all dream of. Orange: -9ºC to +2ºC (16ºF to 36ºF) Though Pink and Orange have the same temperature range, the Pink is for new snow, while the Orange excels in older and transformed snow. This wax works very well on snow that has frozen overnight, but is warming up during the day. Red: -13ºC to 0ºC (9ºF to 32ºF) For new or non completely transformed snow in 30-60% humidity. Violet: -14ºC to -4ºC (7ºF to 25ºF) A great wax for new and old snow, medium to high humidity. Green: -24ºC to -13ºC (-11ºF to 9ºF) An excellent choice for colder temperatures.

- Solda Fluor Carbon 27 wax is the ideal base layer for Solda glide waxes in high humidity. - Helps to saturate ski base with graphite dry lubricant and it helps reduce static. - Contains a fluorine additive, making it an excellent choice for all snow types. - Optimum base layer for Solda F31 and Solda PowerJet waxes. - Also works well as a base for dirty, abrasive snow. - Apply a layer by rubbing the wax on a clean base and then applying the first layer of temperature specific wax and heating both with the waxing iron. - Sold in 75g and 180g blocks. Recommended for: Humidity: 50-100%

- Easy to use universal liquid wax from Solda for recreational skiing, training or racing. - Hydrocarbon-based formulation is fluorine free. - Designed for use in all types of snow with a wide temperature range. - Easily applied cold without an iron: simply apply to the base with the supplied applicator sponge, let dry for 20-30 minutes, then polish with a soft cloth. - Works best from -10°C to +5°C (14°F to 41°F) in 50-100% humidity. - Available in 90ml bottle with cap and applicator sponge or 250ml spray bottle.

- Protect your clothes when waxing while wearing this Solda apron. - Black, high quality apron has two front pockets to hold your tools. - Made of a poly/cotton blend, it is easily washable. - Also great for use in the kitchen.

- One of our favorite brushes in the Solda line. - Use this for cold application and polishing fluorocarbon top coat waxes. - Work back and forth with medium hard strokes to create friction and force fluorocarbon powders or block applied waxes into the bases. - Natural cork working surface. - Curved sides for a comfortable grip.

- Soft felt brush from Solda. - Curved sides for a comfortable grip. - Use this brush for polishing fluorocarbons after corking for the fastest skis possible!

- Special remover for fluorinated ski waxes. - A gentler cleaner than citrus solvent. - Designed to remove dirt while leaving fluoro wax intact. - 75ml bottle with applicator sponge.

- Classic nylon hand brush from Solda. - For many skiers this could be your only brush. - Use this brush to remove waxes from most base grinds after scraping. - Will not damage structures. - Medium brush bristles made from durable synthetic nylon fibers.

- High performance glide wax from Solda. - Webskis go-to wax on race day. - Ideal wax for conditions of high humidity. - F40 Carbon replaces the familiar F40 Top Race. - Carbon additive has been found to equal the old F40 in new and newly transformed snow and to exceed the older Top Race product in old, abrasive or dirty snow. - Available in 60g and 180g blocks. - Also available in 30g powder form, which can be quickly and easily mixed with additives. Yellow: -4ºC to +5ºC (25ºF to 41ºF) Ideal for transformed snow in warmer temperatures above and just below freezing. A great spring-like conditions wax. Orange: -9ºC to +2ºC (16ºF to 36ºF) Excels in older and transformed snow. This wax works very well on snow that has frozen overnight, but is warming up during the day. Red: -13ºC to 0ºC (9ºF to 32ºF) For new or non completely transformed snow in 30-60% humidity. Violet: -14ºC to -4ºC (7ºF to 25ºF) A great wax for new and old snow, medium to high humidity. Green: -24ºC to -13ºC (-11ºF to 9ºF) An excellent choice for colder temperatures.

- A slightly stiffer brush than the standard nylon. - A combination of stiff nylon and soft horsehair bristles. - Use this after scraping for removing warm waxes from coarse base structures. - If you are looking to own just one brush and live in a climate where you have lots of medium to warm snow, this could be the choice.

- Developed by Solda for serious racers when speed is important. - F40 Top Race works great in high humidity conditions. - A great choice for new or newly transformed snow conditions and the humidity is over 60% - Available in 60g and 180g blocks. Yellow Temp: 41° to 28°F (+5° to -4°C) Humidity: 60-100% Red Temp: 8° to 33°F (-13° to 0°C) Humidity: 70-100% Green Temp: 7° to -13°F (-14° to -25°C) Humidity: 60-100%