Your Search: "echo"

- Echo's Mini bashplate as found on their complete bikes. - Constructed from tough 6061 T6 heat-treated aluminum. - Shorter and more compact than previous versions, making it lighter and less prone to bending. - Holes drilled to reduce weight. - Directional teeth on the outside of the plate provide grip on obstacles. - Supplied with three bolts and nylon spacers and a chunk of polyurethane shock absorbing material. - Designed for 2012 and newer Echo frames, not compatible with pre-2012 frames.

- The classic Echo TR headset. - Made from durable 2014 aluminum. - Fits 1 1/8" headtubes. - Countersunk top cap bolt mates perfectly with Echo's topcap. - Drilled top cap keeps weight to a minimum. - Anodized finish with laser-etched logos. - Starnut and color-matched 5mm spacer included. Please Note: some TR headsets may now come with updated "E" Echo logos instead of the Echo text on the cups and spacers.

Derailleur hangers snap pretty regularly when you get into trials. You might hit it on a ledge or when you jump from obstacle to obstacle. It's always advised to have a spare hanger on hand, so you can get back on your bike in 5 minutes. - Break a derailleur hanger on your Echo frame? These are what you need. - Compatible with all vertical dropout 2005-2010 Echo, Zoo!, Adamant, Czar, and GU frames. - Supplied with mounting bolt.

- Durable rim strips from Echo. - Made from strong yet light plastic. - Heat-bonded join. - Available in white only with printed Echo logos. Widths: - 28 mm for all front wheel sizes (20", 24", 26") - 32mm for 24" rear - 35mm for 19" and 26" rear. Please Note: width can vary a few mm from strip to strip.

- The Echo full bashring as found on Echo complete bikes. - Constructed from high quality 7075 Aluminum for high strength. - Protects freewheel or front sprocket no matter what position the pedals are in. - Knobs around the edges give improved grip. - Machined holes around the center save weight. - Laser-etched logos and anodized finish for a clean look. - Designed to cover 18t freewheels and sprockets.

- Replacement pedal cage bolts from Echo. - M5 thread with countersunk head. - Constructed from steel for maximum durability. - Bolt head fitted for 3mm allen key. - Compatible with Echo cage pedals and most other brands of caged pedals including Rockman, Trialtech, Jitsie and Try-All. - Sold individually.

- Splined cogs to fit pre-2016 Echo splined hubs. - Designed fit the drive shells on pre-2016 Echo splined hubs, not compatible with standard Shimano spline hubs or 2016 and newer Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Offset design allows fine-tuning of the chainline by flipping over the cog. - Compatible with all 1/8" and 3/32" chains. Please Note: These may come in a black or silver finish.

- Threaded steel cogs from Echo. - Made from heat-treated steel for maximum durability. - Wide base increases the thread contact area to reduce the likelihood of stripping. - Standard 1.37" x 24tpi threads to fit all fixed rear hubs. - Compatible with all 1/8" and 3/32" chains. - 16t cog features holes drilled around the base to save weight.

- Lightweight 4-bolt bashplate from Echo as found on their Mark 6 20" bikes. - Constructed from tough aluminum for good blend of durability and weight. - Compact 4-bolt design makes it lighter and less prone to bending than traditional 3-bolt designs, as well as putting less stress on the downtube. - Teeth on the outside of the plate provide grip on obstacles. - Machined cutouts keep weight to a minimum. - Supplied with titanium mounting bolts, nylon spacers, and shims. - Compatible only with Echo Mark 6 and newer 20" frames. - Anodized black finish.

- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.

- Lightweight aluminum crank bolts as found on Echo complete bikes. - Manufactured from high quality 7075 T6 aluminum. - Supplied with steel spacers. - Fitted for an 8mm allen key. - M15 thread fits most modern ISIS bottom brackets. - Anodized finish with laser-etched Echo logos. Please Note: Although these are made from tough, high quality aluminum, we still recommend that you tighten down your cranks with steel bolts, and then install the aluminum ones. Note: These will not fit Trialtech Race ISIS or Trialtech SL Ti bottom brackets. Those require M12 and M14 crank bolts respectively.

- Splined cogs from Echo as found on their complete bikes. - Designed fit the drive shells on 2016 and newer Echo splined hubs, not compatible with standard Shimano spline hubs or older Echo splined hubs. - Manufactured from high quality, durable ChroMo steel. - Wide base prevents cogs from digging into the driveshell - Compatible with all 1/8" and 3/32" chains. - Black finish.

- Replacement axles for Echo pedals. - Constructed from durable steel. - Flat spaces on axle end to fit a 15mm pedal wrench. - Bearings, nuts not included. - Compatible with Echo TR and SL caged and platform pedals. - Sold individually. Please Note: The right pedal axle requires a left-hand threaded nut!

- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.

- Echo's new lightweight front 24" rim as seen on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black.

- Redesigned TR platform pedals from Echo. - New Y-shaped platform design increases strength and reduces weight. - Concave platform shape increases grip over the previous design. - Constructed using 6061 T6 aluminum for the body and durable chromo steel for the axle. - Great option for riders looking for a more durable alternative to caged pedals without sacrificing weight. - Super slim design gives excellent clearance over obstacles. - Replaceable steel pins provide good grip in all conditions. - Sealed cartridge bearings provide smooth operation and superior durability. - Axle features 15mm flats for easy pedal installation and removal. - Anodized finish with laser-etched Echo logos. Please Note: These do not come with the pins installed. A wrench is provided with the pedals for installation of the pins. We highly recommend using locktite on the pin threads when you are installing, otherwise the pins can come loose and strip the threading or get lost. Also Note: Always remember to grease your pedal threads before installation!

- Echo's lightweight front rim as found on their complete bikes. - Constructed from high quality 6061 T6 aluminum. - Un-eyeletted to save weight. - 38mm width provides stability and helps prevent tire roll. - Single wall design with large machined holes saves weight and removes material where it isn't needed. - Available in 32 hole only. - Anodized black or red.

- Fixed non-disc rear hub from Echo. - Aluminum hub shell and axle keep weight down. - Sealed bearings provide smooth, durable running. - Standard 1.37" x 24tpi threads to accommodate threaded cogs. - Spaced for use with 116mm frames without snail cams. - Supplied with steel bolts and washers. - International Standard rotor bolt pattern. - 32h drilling only. - Anodized black finish with laser-etched logos.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Lightweight foam grips from Echo. - Tough, durable foam compound feels a bit more like a rubber grip than other foam grips. - Foam construction is comfortable on the hands with or without gloves. - Subtle matte black Echo logos on each grip. - Sold as a pair. - Bar end plugs NOT included.

- Replacement stem bolts for Echo stems. - M6 x 20mm size. - Fitted for 5mm allen key. - May also fit other stems. - Available in steel with black or silver finish or titanium.

- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).

- The Echo Integrated Headset, as found on Echo bikes. - Superlight integrated headset: the bearings press directly into the frame, keeping weight to an absolute minimum. - Easy to install and low maintenance. - Compatible with all Echo, GU, and Czar frames 2015 and newer. - Includes bearings, dust cap wedge, 2 6mm headset spacers, sloping top cap, and titanium top cap bolt. - Not supplied with crown race. - Available to fit standard 1 1/8" frames and 1 1/8"-1.5" tapered frames.

- High quality lightweight fork as found on Jitsie complete bikes. - Developed and tested with Jitsie team riders Dani Comas and Alejandro Montalvo. - Manufactured from aerospace 7006-T6 aluminum. - 10mm CNC machined dropouts are compatible with nearly all trials hubs. - CNC machined steerer tube is internally tapered to provide extra strength without adding unnecessary weight. - 4-bolt version features CNC-machined brake mounts on the rear of the fork spaced at 85mm with extra long welds to increase durability. - Disc version features a CNC-machined Post Mount. - Ovalized fork blades give an excellent strength to weight ratio as well as a larger weld contact area at the crown. - Black anodized finish with Jitsie graphics. - Supplied without starnut. We recommend the Trialtech Large starnut. Please Note: Fork may be supplied without graphics on the fork legs.

The MET Echo MIPS is an entry-level MTB helmet high in quality and protection. It’s a perfect choice for those who are just beginning their adventures on the trails. The construction of the helmet offers the same technology and safety, with increased coverage around the back of the head. Featuring the MIPS-C2 brain protection system, the Echo is able to slide against the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Mid Fit System - The 360° head belt reduces pressure points on the perimeter of the head - The removable visor with hidden anchors ensures maximum versatility - Hand washable comfort pads - Straps with an adjustable divider provide a customized fit - 14 vents are internally engineered for air channeling to improve ventilation and comfort - Reflective rear sticker - Certifications CE; AS/NZS Sizing: - Small/Medium = 52 – 57cm - Medium/Large = 57 – 60cm - Large/X-Large = 60 – 64cm

- The Inspired Headlock system is designed to allow front brake hose routing through many forks. - Perfect for riders who want to do barspins or tailwhips. - High quality, CNC machined aluminum top and bottom caps. - Top cap features a large slotted guide for easy assembly and optimal hose routing (Orientation can be changed to suit left or right front brake positions). - Tapered bottom cap design fits most forks. - Available to fit standard 1 1/8" or 1.5" tapered forks. - Supplied with steel bolt kit for different length steerers. - Fits steerer lengths 205mm- 250mm. - Anodized black with laser etched Inspired logo. Please Note: The 205-250mm length is for the fork steerer only, it does not include the length of the fork crown, which is typically 20-50mm.

- High quality fork adaptors for Inspired Arcade forks only. - Designed to allow 9mm and 10mm axle hubs to be used in Arcade fork 15mm taper dropouts. - CNC machined from 7075 aluminum. - Anodized black only. - Supplied as a pair.

- Replacement threaded top cap for Trialtech forks. - Fits Trialtech Sport 20" and 26" forks. - CNC machined from 6061 Aluminum. - Available in anodized black only.

- Spare hub axle spacers from Belgian brand Jitsie. - CNC machined from high quality aluminum. - Designed to work with Jitsie hubs, may also work with other brands. - Narrower side of spacer rests against hub bearing. - Available in 2mm, 3mm, and 5mm widths. - All sizes have a 10mm inner diameter and 16mm outer diameter. - Anodized black only. - Sold individually.

- Rim strips from Trialtech. - Heavy duty plastic rim tape is tough yet flexible. - Strong heat bonded join with a large enough hole for all types of valve. - Matte finish on one side and gloss on the other. - Very tough, durable, and also waterproof. - Available in Black or White. - Front width 25mm, rear width 40mm. - 24" width 35mm.

- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.

- The updated Inspired Pro V2 rim offers excellent strength and value for street trials. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Un-drilled double wall construction is very stiff and strong, ideal for street riding. - 36mm wide profile gives good anti-roll performance even at low tire pressures. - For use with disc brakes only. - Available in gloss black anodized finish with white Inspired graphics. - 32h spoke drilling only.

- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight. - Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley. - Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!). - Custom butted center section adds strength around the spoke holes for improved durability. - 31mm wide profile gives a good balance of low weight and tire performance. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in sandblast black anodized finish with Carthy Signature laser etched logos. - Available in 28h or 32h spoke drilling. - For use with rim or disc brakes.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Replacement star fangled nut for use inside fork steerer tubes to allow pre-load of headset bearings. - Standard M6 x 1.0 thread. - For sizing, the star nut should be 1-3mm larger than the internal diameter of your fork steerer.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- The Inspired Pro V2 rim offers excellent strength and value. - Updated V2 version tested and proven by John Langlois. - Double wall angular profile for increased strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 36mm width gives good anti-roll performance even at low tire pressures. - Available in gloss black anodized finish with white 'Inspired' graphics. - For use with disc brakes only. - 32h spoke drilling only. - Not tubeless compatible.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Durable double wall rim from Inspired. - As fitted to the Inspired Flow bikes. - Double wall, high quality aluminum construction for maximum strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 32mm wide profile. - Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes. - Black anodized finish with laser etched Inspired logo. - 32h spoke drilling only.

- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Replacement "Spanish Style" press-fit bottom bracket from Trialtech. - ISIS bottom bracket to fit frames with Spanish style BB shells (Echo, GU etc.). - High quality manufacturing with excellent tolerances and finishing quality. - Custom machined, lightweight M15 cromoly steel axle keeps weight down. - 132mm axle length is 8mm longer than Echo press fit bottom brackets, which gives additional clearance for certain crank/frame combinations with low clearance. - 6061 aluminum 'Top Hat' axle spacers maintain correct bearing preload and crank fitment. - Orientation of 'Top Hat' spacers can be changed to work with standard screw-on freewheel cranks or the Echo splined freewheel system. - Includes M15 steel crank bolts. Please note: When fitting axle spacers, the wide end must face inwards towards the frame when using standard screw-on freewheel and outwards when using the Echo splined freewheel system. Incorrect fitting of the spacers will void the warranty.

- Replacement bearing to fit Spanish bottom brackets only. - Compatible with all newer Echo, Zoo, Czar and GU frames as well as some others. - High quality construction with double seals. - For use on the drive or non-drive side. - Sold singly. - OD:37mm, ID:22mm, Width:9mm

- Splined freewheel from Crewkerz to fit their AS30 cranks. - Uses 9 steel pawls with a 45t ratchet to create 135 engagement points for ultra quick pedaling response! - Machined from a custom mold from tough CroMo steel for maximum durability. - Extra strong springs provide reliable engagement and give the freewheel a distinctive loud sound. - Unlike most other freewheels it uses high quality sealed bearings for improved durability and protection from dirt and grit. - Splined design makes it much easier to install and remove than traditional threaded freewheels. - Compatible with Shimano HG spline style cranks such as Crewkerz, Clean, and Bonz, will not fit Echo splined cranks. - Supplied with a spacer to be used between the crank and freewheel. - Anodized black finish. - Available in 18t only. Please Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.

- Light sprung chain tensioner from Trialtech. - Single speed specific chain tensioner. - Constructed from high grade aluminum alloy, spring steel and chromed steel. - Multi coil spring to prevent loss of tension over time, a common problem with other tensioners. - Single sided cage design saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise. - Slim design to help reduce the chance of damage during riding. - Adjustable chain line ensures compatibility with most setups. - Custom mount design allows the tensioner to be tightened securely against the hanger without requiring the delicate positioning tab that can be damaged or limit performance on competitor's products. - The model without hanger mount fits 2014 Fourplay Tensioner Mounts and Trialtech Sport Sprung Tensioner arms. - The model with hanger mount fits all frames with a standard derailleur hanger. - Gloss black anodized finish.

- Lightweight and extremely minimal single speed spacer kit from Trialtech. - Includes a range of spacer sizes to allow you to fine tune your chain line: 2x 10mm, 1x 6mm, 1x 5mm and 1x 3mm. - Great for single speed conversions or fine tuning your chainline. - CNC machined from high grade aluminum alloy, then anodized to prevent corrosion. - Available in Gloss Black only with laser etched Trialtech logo on the 10mm spacers. - Cassette lockring sold separately.

- Custom designed sprung chain tensioner as fitted to Inspired Team bikes. - Developed and proven by Inspired Team riders. - Constructed from high grade 7075 and 6061 aluminum alloy. - High tension coil spring provides excellent chain tension. - Single sided cage saves weight and allows the chain to be taken off quickly for easier wheel fitting/removal. - Runs on two plastic jockey wheels for minimum noise and low drag. - Slim, integrated design helps reduce the chance of damage during riding. - Extended cage improves ergonomics and further aids chain removal. - Fits directly onto Skye V3/V3.5, Fourplay/Hex (2014-onwards) and Link (2023-onwards) frames. - Satin black anodized finish. - 16t (Fourplay, Skye, Link) or 18t (Hex) compatible versions available. - Includes frame fixture bolts.

- Lightweight ISIS crank bolts from Jitsie. - Designed and manufactured in Belgium as part of the Jitsie Race range. - Compatible with all M15 threaded ISIS bottom brackets. - Machined from high quality aluminum, a conical head and cutouts keep weight to an absolute minimum. - Supplied with superlight aluminum washers, saving further weight. - Fitted for a 10mm allen key instead of 8mm used on most other crank bolts. - Available in anodized black or red with laser-etched Jitsie logos. - Sold as a pair.

- Great value forged cranks from Jitsie. - Constructed from forged 7075 T6 aluminum for optimal stiffness. - Material removed from the back of the cranks saves weight while maintaining strength in key areas. - 1.37" x 24tpi threaded section suitable for all trials freewheels or threaded cogs. - Matte anodized black finish with Jitsie logos. - Compatible with all ISIS bottom brackets. - Available in 160mm, 165mm, 170mm, and 175mm lengths. Please note that the minimum required thread contact between crank arm and sprocket/freewheel is 9mm, and a 1.37" sprocket/freewheel must be used. Failure to adhere to this instruction will damage the cranks threads and this is not covered under warranty.

- Lightweight half bashring from Crewkerz as found on their AS30 cranksets. - CNC-machined from 7075-T6 aluminum for maximum strength and durability. - UCI competition style can be fitted to suit left or right footed riders. - Small pockets on each side mate with the pins on Crewkerz AS30 cranks to keep the bashring oriented perfectly at all times. - 3mm wide base with 6mm outer edge. - CNC cutouts in center section reduce weight and improve aesthetics. - Designed for use with pre-2018 Crewkerz AS30 cranks, may also work with other cranks. - Available in 18t with red anodized finish. Please Note: These are designed for use with pre-2018 Crewkerz AS30 cranksets. The small pocket on the ring that mates with the pin needs to be modified slightly (enlarged) to fit the newer AS30 cranks.

- Splined cog from Crewkerz. - CNC machined from super tough Cro-Moly steel for maximum durability. - Wide base gives a greater contact area between hub and sprocket, helping prevent 'dig-in' problems associated with narrow based sprockets. - Compatible with Crewkerz and Bonz hubs as well as any other hub that uses the industry standard Shimano HG spline pattern. - Compatible with all 1/8" and 3/32" chains. - Black finish with laser etched product information.

- Light, affordable half bashring from Trialtech. - Great value half bashring to fit nearly all screw-on cranks. - Full CNC machined aluminum alloy construction. - UCI competition style can be fitted to suit left or right footed riders, however it only covers one side of your freewheel/sprocket for maximum weight saving! - 5mm wide base with 5mm outer edge. - CNC scoops in center section reduce weight and improve aesthetics. - Built-in lip allows the bashring to be run with any freewheel. - Matt black anodized finish with laser etched Trialtech logo. - Available in 18T (88mm effective diameter).

- Quality 16t freewheel from Trialtech. - Rear freewheel as fitted to many Inspired complete bikes. - High quality, heat treated steel pawls engage into a tough steel ratchet. - Available with 72 engagement points per revolution with a proven 6 pawl design or 108 engagement points per revolution with a proven 9 pawl design. - Quick engagement and durable operation. - Industry standard 1.37" x 24tpi thread. - 4 inset removal pockets. - Black finish. - Available in 16T only. Please Note: This freewheel is designed for use as a rear freewheel. It can also be used as a front freewheel by kids and light riders but durability may be significantly less for larger riders. Also Note: This freewheel must be bedded in before trials use, which ensures any excess grease used when assembling the freewheel works away from the mechanism. This can be done by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use before it has been bedded in, the pawls may not engage correctly, causing the freewheel to skip, which can damage the pawls and ratchet. The bedding in process can be expedited by spraying a light oil like GT85 or WD40 between the center and outer teeth of the freewheel and rotating it. Failure to bed the freewheel in correctly will void the warranty.

- Super lightweight UCI competition style bashring from Trialtech. - Designed to fit Trialtech Sport Lite Splined Cranks only. - Full CNC machined 7075-T6 aluminium alloy construction. - Can be fitted to suit left or right footed riders. - 3mm wide base with 3mm outer edge. - Precision CNC machined scoops reduce weight and improve aesthetics. - Matt black anodized finish with stylish Trialtech laser etched logos. - Available to fit 18T (88mm effective diameter).

- CNC machined from super tough hardened Cro-Moly to offer a high level of quality and durability. - A shot blasted surface finish after machining increases the surface hardness and improves durability. - Wide 4.5mm base gives a greater contact area between hub and sprocket, reducing interface pressure and helping prevent 'dig-in' problems associated with narrow based sprockets. - Tapered design gives maximum strength, while CNC machined slots (17 and 18T models only) help keep the weight down. - Compatible with all 1/8" and 3/32" chains. - Industry standard Shimano HG spline pattern. - Can also be run in a cassette for your main drive gear. The 4.5mm wide base is the same spacing as an 9 speed Shimano cassette. - Stylish laser etched logos show great attention to detail. Please Note: These may be supplied with a silver or black finish.

- Singlespeed chain used by many trials riders. - Spec'd on many complete trials bikes such as Inspired bikes. - The successor to the very popular Z610 HX chain. - "Stretch Proof" design helps prevent stretch in the plates, meaning chain adjustments are needed less frequently, especially when the chain is new. - Relatively light weight but still quite durable. - Features mushroom pin rivets to eliminate splayed links. - Also supplied with a re-usable master link that allows for easy installation and removal. - 1/2" x 3/32" - 112 links.

- Replacement pedal cage for Jitsie Single Cage pedals. - Ideal if your cage has broken or the teeth have become worn. - 7075 T6 aluminum construction provides excellent durability. - Available in anodized black only. - Sold as a pair.

- Affordable and durable steel threaded cogs from Jitsie. - Industry standard 1.37" x 24tpi thread fits fixed rear hubs and threaded cranks. - Wide base gives a strong connection between the sprocket and hub/crank. - Made from heat-treated steel - Compatible with all 1/8" and 3/32" chains. - 12t-14t are offset, 15t is centered.